unsigned char d[10]; //用于显示的10位显示缓存
//========================================================
//16进制to10进制输出子程序:显示数据，起始位，结束位，有无小数点
//========================================================
void output(unsigned long dd,unsigned char s,unsigned char e,unsigned char dip) {
unsigned long div;
unsigned char tm[8],i,j;
div=10000000;
for (i=0;i<8;i++) {
tm[i]=dd/div;
dd%=div;
div/=10;
}
for (i=0;i<6;i++) {
if (tm[i]!=0) break;
tm[i]=nul;
}
tm[5]|=dip; //小数点控制，请看“串行LED数码管显示驱动程序”
j=7;
for (i=s;i<e;i++) {
d[i]=tm[j];
j--;
}
}
//把显示位5-9位的10进制数转换成为16进制数
unsigned int input(void) {
unsigned int dd,dat;
dd=10000;dat=0;
for (i=5;i<10;i++) {
dat+=dd*temp;
dd/=10;
}
return(dat);
}
//========================================================
//16进制to10进制输出子程序:显示数据，起始位，结束位，有无小数点
//========================================================
void output(unsigned long dd,unsigned char s,unsigned char e,unsigned char dip) {
unsigned long div;
unsigned char tm[8],i,j;
div=10000000;
for (i=0;i<8;i++) {
tm[i]=dd/div;
dd%=div;
div/=10;
}
for (i=0;i<6;i++) {
if (tm[i]!=0) break;
tm[i]=nul;
}
tm[5]|=dip; //小数点控制，请看“串行LED数码管显示驱动程序”
j=7;
for (i=s;i<e;i++) {
d[i]=tm[j];
j--;
}
}
//把显示位5-9位的10进制数转换成为16进制数
unsigned int input(void) {
unsigned int dd,dat;
dd=10000;dat=0;
for (i=5;i<10;i++) {
dat+=dd*temp;
dd/=10;
}
return(dat);
}